Tag Archives: stamping

My first Christmas card this year

Posted on by
Reply

There have been years that I’d finished all of my Christmas cards by September – having started as early as July – and heaps of them at that. (You can check them out here.)
But not this year. This year I’ve only just finished my very first Christmas card last week. What can I say, I’m not crafting as much as I used to – though one of my new year’s resolutions is More Crafting, so I remain hopeful. 😇

I have to say it was fun to create again, after many moons with hardly any papercrafting at all (except for the occasional card here & there, which I posted here, on my blog).

Here are my design steps:

1. I started by shopping my stash and I found this fresh & modern looking design paper by S.E.I., called Kris Kringle. It is no longer available, however I’m hoping it will inspire you – either to shop your own stash for some great finds, or to shop for similar design papers that evoke the same atmosphere if you like these specific papers.

2. Some baby blue cardstock became a nice base for the card, echoing the occasional light blue the design papers offered and off-setting the rest of the colors nicely.

3. I wanted a special card design so I decided on this slanted tri-fold shape and folded it ‘zigzaggingly’ (I don’t know the official term but I think you’ll catch my drift 😉 ).

4. One of my label dies came in handy to add a stamped sentiment to the front of the card.

5. Tri-fold shapes are always fun because they give you six panels to mat and play with your design papers! You’ll have to keep your embellishments flat however, otherwise your card won’t fit into its envelope. Stamping is a good option of course, as would be (heat) embossing or adding some ink sprays.

In conclusion

All in all I had fun, maybe even more than I expected. It was nice to think about a specific friend and design a card with them in mind. What shape hadn’t they seen from me yet, what colors would they like and what kind of sentiment would they appreciate. Happy thoughts to be pondering.

I’ve found again and again that tailor-making a craft project for a specific person adds an extra dimension of inspiration and fun to my craft projects. Maybe this can be the way forward for me – and who knows, perhaps for you too! – for the foreseeable future, to find some much needed inspiration again!

I might even do some video tutorials again on my Youtube channel (which I always embed on the blog too), so let me know if you’d like one for this type of card – or mini album insert of course, whichever might fit your needs best!

Perfume Card Series: Easy ways to send someone some fragrant love

Posted on by
2

Over the years I have often shared design ideas for cards to send someone an original ‘hug-in-a-mug’, or in other words, how to incorporate a teabag in a creative way.

I’d like to add to that a new series of design ideas, this time centered around perfume and how to send someone an actual vile of perfume. This can be a decant from that awesome niche bottle you own yourself, a small test sprayer you bought online or the official samples that brands hand out and are often added for free to your purchase at your local perfume shop.

Keep those little brand samplers around, they make for great card gifts!

These are small enough to send over the mail, but you will have to find original ways to add them to a card design. Fret not! For that is where this new series comes in.

And here’s my first idea: take a brand’s sample booklet and add it to the front of your card. Choose or create a coordinating background. Keep the booklet closed with a swing tab closure. Stamp a nice sentiment, decorate, and done!

I sprayed my own background in the below example, but you could make this card with design paper too.

I diecut the butterfly with a 2-die set from some papers I inked myself, and added some extra Stickles to highlight.

It’s fast. It’s easy. It adds a lovely little extra ‘something something’ to your card.

Have fun creating!

Quick Birthday Tag – Vintage Style!

Posted on by
Reply

Tip: You don’t always need to create a full-blown birthday card, a nice tag will go a long way too – especially when added to a gift to carry your birthday wishes.

Here’s an easy little gift tag and the steps to create it. I designed it to go with some birthday flowers for a friend.

  1. I chose a cutapart from Stamperia’s Time is an Illusion collection;
  2. Layered a second cutapart on top;
  3. stamped some butterflies;
  4. added a ribbon on top;
  5. added a Tim Holtz quote chip, after using some Distress Mica Sprays to grunge it up a bit.

Easy peasy! 😃

Materials used

Creating your own mixed media design paper

Posted on by
Reply

There are of course hundreds (probably thousands even) of different design paper collections on the market. Still, sometimes you feel you’re in need of another sheet of a particular color scheme to really perfect your project. You could of course purchase (or shop your stash) for a sheet from another collection but: you did you realize you can also create your own? And I don’t mean by becoming a graphic designer yourself and printing some cool computer-generated design you came up with.

No, I mean by applying some very easy mixed media techniques. Here’s how.

  1. Ink, paint or spray a piece of white paper that is suitable for mixed media (so no printer or copy paper please; you can use actual mixed media paper, or paper meant for water painting). Spread several colors randomly; make sure the colors coordinate with the design paper collection you’re using for your project. A stencil can add some fun patterns to the mix.

2. If you want, you can even print an image – or in my case a graffiti-style initial – on your colored paper. Wait until everything is dry though, before you run it through your printer.

3. Add some stamping. You can choose actual images, or just some random patterns. Use an oil-based ink like Archival ink, to make sure your stamping ink does not react to the other mediums you’ve used so far.

4. Add some texture with texture paste. I used Tim Holtz’s Distress Grit paste because that is translucent (so the inking underneath will show through) plus it’s heat-stable so you can emboss it. Which is exactly what I did after I added the paste: I sprinkled it with different colors of Embossing Glaze (which is a translucent embossing powder), let the texture paste dry, and then embossed it.

5. I (of course) forgot that I needed more than one mat, so I had to repeat steps 1-4 to create a second mat. It would have been easier had I just taken a larger piece of paper, did the mixed media techniques, and only then cut it to size. Oh well.

6. Mat your mini album page! As you can see in the pictures below I made sure to choose colors that would coordinate with the rest of the design paper I used.

Same page, with left-page flap opened. The smaller mixed media strip has turned into a mat for the top pocket.

Want to see the entire album? Check the video in this blog post!

Mixed Media Tag with Embossed Gloss Accent

Posted on by
Reply

Did you know that you can use Tim Holtz’s Distress Paint as a resist? To create a mixed media tag, I used this specific technique. I also used clear embossing powder to add a glossy accent – and here are all of the steps to do it!

Step by step

1. STAMP with Distress Paint and/or use a stencil, to add an image or some random patterns. I did both. Use a light color of paint, like white, cream or a very soft pink. Let the paint dry.

Btw, be careful and immediately clean your stamp, for this paint dries quickly and once it dries you won’t be able to get it off your stamp anymore…

2. Color your tag (or any other piece of mixed media cardstock) by blending with different colors of ink. I used both Distress Inks (translucent) and Distress Oxides (opaque). Simply blend right over your patterns – for the paint will act as a resist!

3. Optional: add some extra, subtle background effects by blending through a different stencil.

4. Spray some kind of metal spray to add some sparkle. I used Distress Mica Spray in the color Tarnished Brass.

5. Once everything has properly dried, add a different layer: time for some stamping. Choose one or more images and/or patterns and stamp on top of all the previous layers. First I used a background color of Distress Oxide to add still more interest to the background, this was a script stamp. You can see it on the right side of the tag, on the upper half.

I then stamped the main image in black Archival Ink. This is an oil-based ink, which therefore does not react with or bleed into all of the water-based inks underneath.

6. Pick one or more pieces of your main image that you want to highlight. Cover those fragments with embossing ink – ideally, if you can, use an embossing pen, which gives you maximum control of where you place the embossing ink.

Then take a clear embossing powder and emboss your accent of choice.

Glossy highlight

7. Take some chipboard sentiment pieces and use the same inks to colorize them. Then stick them to your tag.

8. Die-cut a decorative element from metallic paper and add it to the tag. I used Metallic Confections paper by Tim Holtz, but any metallic (or holographic!) paper would do.

Done! Now all that’s left is to tie a piece of string to your tag 🙂

Hope this little step-by-step was helpful! Now go, experiment to your heart’s desire and play with all of the stuff in your stash 🙂 Let me know in the comments if you’re going to try some of the techniques I used here!

If you want still more inspiration, here’s an earlier post where I also used Distress Paint as a resist.

Stamping and Spraying on Coated Paper in Five Easy Steps

Posted on by
Reply

Sometimes, when I order some of my card designs printed, the printing company adds one or two blanks. These are sturdy, completely white cards; they are also coated, for it is a form of photo paper. So it won’t react to mixed media like your usual assortment of craft papers.

I have created a card with such a blank before, using it as an easy base for design paper. You can check out my step-by-step video on that here.

This time however I decided to try out some mixed media techniques to create a card from one of these coated blank photo paper cards. Here’s what I did, and how it worked out.

1. Stamp and color an image

I chose StazOn ink for this, because that is suited especially for smooth, non-porous surfaces – like photo paper. I also colored the stamped image, using Tim Holtz Distress Markers.

In hindsight, that turned out not to be the best combination, for the StazOn ink reacted a little bit to the Distress Markers. So, my tip here is: IF you want to use water-based markers to color your image, then do NOT use an alcohol-based ink to stamp, but an oil-based ink like Archival Ink.

Stamp an image that speaks to you

2. Seal your image

If you’re going to spray a background, you’ll need to seal your colored image first, otherwise it will either run and wick, or it will be covered up by your sprays (depending on the mediums you choose).

I wanted to use Distress Spray Stains, which are water-based, and since I already used Distress Markers to color the image, I knew exactly how to seal it: with Distress Micro Glaze.

Simply dab your finger lightly in the jar, and rub it all over the colored image.

Side note: of course there are several other products on the market to seal your image. For instance, transparent gesso, or mod podge, to name a few. I’m simply mentioning the one I used. #nonspon

3. Spray your inks

Spray your entire card to your heart’s desire. Then remove all of the sprayed inks from your stamped image with a paper towel. Thanks to the Micro Glaze, none of the sprays will stick and will come off easily, without messing up the colors of your image.

Also, because my paper was coated, it didn’t really absorb the inks too well; there were several spots where the ink didn’t take, causing a great bonus effect!

The materials I used

4. Add special effects

I added some transparent medium to create a bit of a glass effect for the glasses: I used Nuvo Crystal Drops for this, but you could use several alternatives, like Glossy Accents, Paper Glaze or any other dimensional transparent medium.

5. Add a sentiment

Last but not least, I stamped a sentiment – this time with Archival Ink (having learned my lesson from step 1).

Alternatively, you could also go dimensional and use wooden or chipboard sentiment pieces.

And done!

Have you ever crafted with coated paper like this? Feel free to ask any questions, or to let me know what you think, below in the comment section!

A water-colored card (with Distress reinkers!)

Posted on by
Reply

Stamps are of course great adornments on almost any background, but you can also go the other way around: start with a stamped image on a white background, then coloring it in yourself – Including the background.

I started with a nice image of a rustic window, its shutters open, some vines and flowers growing around it. I stamped with black archival ink on a piece of sturdy matte-coated paper I had laying around and didn’t know any properties of – but thought, oh well, we’ll see, this will probably work at least somewhat (and it did 🙂 ).

I then took out my Distress ink Reinkers, put a couple of drops of each color in a Tim Holtz Ink Palette, and went to work with a watercolor brush pen.

I colored the entire surface, paying special attention to the window panes (how does one color glass…?)

When the ink was sufficiently dry, I covered each window with Glossy Accents, to give them a nice ‘window-like’ reflection.

To finish it off I die-cut a sentiment (Congrats) from rose gold (almost copper) metallic paper and attached it to the lower right corner.

All in all it was a nice, meditatively calm kind of project. The reinkers worked wonderfully as watercolors, and the ink palette came in handy. But note that you can’t really travel with the ink palette because the ink drops will not remain in their pans – which to me was a disappointment.

Watercoloring with Distress

Posted on by
Reply

Watercoloring is a great way if, like me, you’re not a particularly good colorist, mainly because it’s a relatively forgiving technique. Water will help you blend out colors and sharp lines, at least a bit. Of course there is much to learn here, but even as a beginner I felt confident enough about my first water colored cards to actually send them out to people.

In the second half of the video I’m showing you some technique, when I’m coloring one of the envelopes. I used several colors of Distress Ink (minis) and Distress Markers. It was simply what I had, hence the combination of inks and markers. Since these Distress products are all water-based and really work well together, it’s great to combine them and create the color palette that you’re looking for.

Watercoloring is a great technique if you’re out on the road: contrary to scrapbooking, it takes very little to take with you what you need, and to have some relaxing moments while you’re not at home. Just do the stamping at home, and color them on the road. So while this will probably not become my main hobby, it will definitely stay in my papercraft repertoire!

How to add glitter to a sentiment

Posted on by
Reply

Ranger’s Sticky Embossing Powder is great for adding very precise glittering or foiling, for instance on a very detailed and delicate (stamped) picture or a (stamped) sentiment. In this week’s (free!) video tutorial I’m showing you how it works – and sharing a very important tip that will help you avoid the mistake I made…! 😉

The card in the video is the Twist & Pop card I shared some blog posts ago in a tutorial of its own, so check that out if you’d like to create one yourself.

Enjoy the tutorial and glitter away! ?

 

 

 

BewarenBewaren